Product Details:
Payment & Shipping Terms:
|
| Terminal: | 65300113722DEC Or Equivalent | Housing: | 653002113322 Or Equivalent |
|---|---|---|---|
| Wine: | 28 AWG OD:1.0mm Wine Red/ Black | Cable: | 22 AWG *2C OD:4.0 Black |
| Connector: | DC Jack 3.5*1.35mm | Overmold: | Black PVC |
| Conductor Resistance: | 2 Ohm | Insulation Resistance: | 10M Ohm |
| High Light: | hirose cable assembly,custom rf cable assemblies |
||
Black PVC Molding Type Power Cable Assembly 28AWG / 22AWG Wine DC Jack 3.5*1.35
Detail Product Description
WINE: 28 AWG OD:1.0mm wine red/ black
Cable: 22 AWG *2C OD:4.0 Black
Conductor Resistance : 2 Ohm
Insulation resistance: 10M Ohm
Connector: DC JACK 3.5*1.35MM
Application:
1. Wireless industries
2. Communication equipment
3. Base stations
4. Telecom
5. Test and measurement
Specification
|
A. Electrical Characteristics |
||
|
conductor |
0.16±0.008 |
|
|
conductor material |
copper wire |
|
|
insulator material |
PVC |
|
|
Insulator color |
red, black |
|
|
Jacket material |
PVC | |
|
B. Material & Mechanical Characteristics |
||
|
Cable Type |
AWG22*2C OD4.0 |
|
|
Connector Type |
DC jack 3.5*1.35 |
|
|
Conductor Resistance |
2Ohm |
|
|
C. Environmental |
||
|
Operation Temperature |
- 40 ˚C ~ + 65 ˚C |
|
|
Storage Temperature |
- 40 ˚C ~ +80˚C |
|
Characteristics and Reliability Test
|
Test Items |
Test Condition and Procedure |
Requirements |
|
|
C1 |
S.W.R. |
Set DUT on Network Analyzer; make individual calibration to test |
Directive DUT specification |
|
M1 |
Vibration |
MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction |
1. No Visual Damage 2. Frequency Tol.<= 5% |
|
M2 |
Random Drop |
Height: 1.5 Meter; 3 directions; 1 time for each direction |
1. No parts separated 2. Frequency Tol.<= 5% |
|
M3 |
Solderability |
MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds |
1. Mounted on PCB 2. No Visual Damage |
|
M4 |
Terminal- Pull Test |
MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal |
1. Directive DUT specification 2. Frequency Tol.<= 5% |
|
M5 |
Dimension |
Inspection of dimension, color, material, package, surface process |
Directive DUT specification |
|
E1 |
Salt Spray |
MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours |
After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
|
E2 |
Humidity |
MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours |
After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
|
E3 |
Thermal Shock |
1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 |
After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
|
E4 |
Life (High Temp.) |
MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours |
After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
|
R1 |
RoHS |
With Reference to IEC 62321:2008 with flow chart |
Directive RoHS 2002/95/EC |
|
R2 |
PFOS |
With Reference to USA EPA 3540C:1996 by LC/MS |
Directive RoHS 2006/122/EC |
|
R3 |
PFOA |
With Reference to USA EPA 3540C:1996 by LC/MS |
Directive RoHS 2006/122/EC |
