Product Details:
Payment & Shipping Terms:
|
| Impedance: | 50Ω | Material: | Brass |
|---|---|---|---|
| Frequency Range: | DC - 6 GHz | Plating: | Nickel / Gold |
| Temperature Range: | -55° C ~ +155° C | Insulator: | LCP, PTFE Or PFA |
| High Light: | rf antenna connector,coaxial cable connectors |
||
Low Reflection Broadband MMCX RF Connector Gold Plated RoHs Approval
Product Description :
The MMCX series is also called MicroMateTM. It is one of the smallest RF connector line and was developed in the 1990's . MMCX is a micro-miniature connector series with a lock - snap mechanism allowing for 360 degrees rotation enabling flexibility in PCB layouts . MMCX connectors conform to the European CECC 22000 specification.
The micromate family of products is a 6 GHz 50 Ω interconnect system . A range of connectors are available including surface mount , edge card , and cable connectors .
| • | Broadband performance with low reflection DC to 6 GHz, providing a high-quality solution at a low cost |
| • | Quick connect/disconnect snap-on mating reduces installation time |
| • | Conforms to European CECC 22000 specifications |
| • | Available in straight and right angle plugs and printed circuit board connectors |
| • | Antennas | • | Base stations | • | Broadband communications |
| • | Cable assemblies | • | Components | • | GPS |
| • | Instrumentation | • | PCMCIA cards | • | Radio boards |
| • | Satcom | • | Telecom |
| Electrical | CECC 22000 | |
| Impedance | 50 ohms | |
| Frequency Range | DC - 6 GHz | |
| VSWR | 4.4.1 | 1.15 max. @ DC - 4 GHz |
| 1.40 max. @ 4 - 6 GHz | ||
| RF-Leakage | 4.4.8 | 60 dB minimum @ 1 GHz (flexible cable) 70 dB minimum @ 1 GHz (semi-rigid cable) |
| Voltage Rating (at sea level) | ≤ 170 Vrms (depending on cable) | |
| Contact Resistance | 4.4.2 | center contact: ≤ 10 mohms |
| 4.4.3 | outer contact: ≤ 5 mohms | |
| Insulation Resistance | 4.4.4 | 1,000 Mohms minimum |
| Dielectric Withstanding Voltage | 4.4.5 | 500 Vrms (at sea level) |
| Mechanical | CECC 22000 | |
| Mating | Snap-on coupling | |
| Contact Captivation | 4.5.2 | 2.3 lbs |
| Engagement Force | 4.5.4 | ≤ 3.4 lbs (15N) |
| Disengagement Force | 4.5.4 | ≥ 1.4 lbs (6N) |
| Durability (matings) | 4.7.1 | 500 cycles minimum |
| Environmental | CECC 22000 | Test Requirement |
| Temperature Range | 4.6.5 | -55° C to +155° C |
| Thermal Shock | 4.6.7 | MIL-STD-202, method 107, cond. F |
| Moisture Resistance | 4.6.6 | MIL-STD-202, method 106 |
| Corrosion | 4.6.10 | MIL-STD-202, method 101, cond. B |
| Vibration | 4.6.3 |
3 cycles, 3 opposite directions, 10 - 150 Hz 10 - 60 Hz: 0.75mm/0.03in., 60-150 Hz: 10 G |
| Mechanical Shock | 4.6.4 | MIL-STD-202, method 213, cond. B |
| Humidity | 4.6.6 | MIL-STD-202, method 103, cond. B |
| Material | CECC 22000 | Test Requirement |
| Body and Outer Contacts | Brass, nickel or gold plated | |
| Female Contact | Beryllium copper or phosphor bronze, gold plated | |
| Crimp Ferrule | Copper or brass, nickel plated | |
| Insulator | LCP, PTFE or PFA |
Note: These characteristics are typical but may not apply to all connectors.
About us :
1. We specialize in RF connectors , RF cable assembly and RF connectors . The main products we manufacture are RF connectors, MCX , MMCX , SMA , SMB , N , RF connector cable Our products are sold to different areas of overseas markets .
2. We have passed ISO9001 quality certification and our products
antenna connector comply with RoHS requirement .
3. We have professional technical development team . we have advanced NC processing equipment and precise test equipment .
4. Our principle is to meet customers’ requirement by good service and high-quality products . The prices of products….. are very competitive and reasonable .
5. We are committed to providing the best products….. to our customers with quickest delivery and best price .
Quality is essential to both of us, we believe that High quality, Low price,Mutual benefit will be good basis of our cooperation!!!
